Battery and connectivity check

The reader battery can last up to 6 months with normal use before requiring a recharge. If the battery falls below 30%, a red light will blink continuously to remind the driver to recharge. A USB charging cable is included. The units must be recharged with a charging device compliant to standard EN 62368. For safety reasons the battery will not be charged below 0 C° , or higher than +45 C° degrees.

To check the status of the battery, push and hold the ‘x’ button for 3 seconds. A light will indicate the current battery life: green >70%, yellow 30% - 70%, red <30%.

To check connectivity to the ABAX device, push and hold the ‘x’ button for 3 seconds. A light will indicate the current connectivity: blue shows the reader is connected, red shows it is not connected.