The ABAX6M IoT Gateway is ideal for monitoring usage, location of all types of machines, trailers, heavy equipment, high-value mobile assets and it is designed for rapid return of investment.
It features a waterproof and rugged enclosure as well as a large backup battery if required. If you need further protection, simply add the special designed steel cage for peace of mind.
The ABAX6M enables improved operating efficiency, asset recovery, streamlined service and a maintenance platform with 3 different inputs.This is part of our IoT global network which combines asset tracking and service as well as maintenance module solutions in a single platform
GPS tracker with 3 inputs
3 separate inputs for usage log
A flexible solution for trailers
Waterproof IP67
Battery backup
Real time GPS location
Ensure you keep your service plan
Recover lost assets
72x72x18,5 mm
106 g
Operating temp: -20ºC to +60ºC
Battery capasity 3400mAh/12580 mWh
When installing the ABAX6M be sure to follow the instruction manual of your machine.
8 hours charging time from 0-100%, delivered with a 50% charge
Use the 150 cm cable provided use of a different cable will interfere with the warranty of this product.
Updates every 60 seconds when powered and in movement
Sensors: Accelerometer, Gyro, GNSS and temperature
| Installation type: | Wired installation 3 usage logs |
| Typical equipment: | Heavy plant machinery (Excavators, Diggers, Generators etc.) |
| Estimated installation time: | 20 minutes |
| Required tools: | Soldering iron, heat-shrink kit, multimeter |
| Usage logging: | 3 seperate 0-60V analog input voltage for usages logging |
| Vibration approvals: | Shock form: half sinus Peak acceleration: 500m/s² Shock duration: 6ms Number of shocks: ±10 (X,Y,Z) total =60 Test axes: 3 (±X, ±Y, ±Z) |
| Supply voltage: | 6 to 60V - M8 connector |
| Red wire: | For permanent power |
| Black Wire: | For ground (earth) |
| Yellow Wire: | For a power source that is active when the ignition is on |
| White Wire: | For a power source that is active when the ignition is on |
| Blue Wire: | For a power source that is active when the ignition is on |
Do not mount the unit under metal as it may interfere with GPS signal strength.
The cage is custom designed and we ensure it will not interfere with the signals sent from the device. The cage will also ensure the device is prepared for extreme conditions. The cage can be mounted with one way tampering screws that will make it difficult for potential thiefs to remove.
Dimensions: 78,4 x 100,4 X 24.6 mm
Weight: 197 gr
3 mm stainless steel
Default tolerance: 0,3 mm
